Cribbage Board Templates
3:03 PM
Brandon
, Posted in
cribbage board templates can be made in any design that you choose. Creating one from hand using a template like the ones found here http://cribbagecorner.com/boards/templates gives your cribbage boards a unique feel that is all yours. Design your Cribbage Board template using graph paper. Insure the length and width of your design does not exceed the dimensions of the wood being used as the board. Trim the width of the template to 4 inches wide. Tape the template securely to the cardboard.
Mark the holes through the template into the cardboard. Tape the cardboard with the template securely to the hardwood. Mark the bit a ½ inch from the tip with tape. Drill each marked hole through the template into the hardwood, stopping at the tape mark. Remove the cardboard and template from the hardwood. Sand the edges of the hardwood board and around the peg holes lightly. Seal the peg holes with the wood-burning tool by using a wide tip and pushing it up and down inside each hole. Burn any desired design into the wood. Spray on sealant to seal the board. Allow the sealant to air dry before using the cribbage board.
0 Response to "Cribbage Board Templates"
Post a Comment